Marcela's latest activity
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.I don't see any 29 tires that are appealing for a heavy ebike that will carry a little cargo, probably another 30# at the most...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.The Como wheel has a nice profile so I took it apart. The rim id width is 30mm, the tire is 2.3. Don’t think I would want to go much...
-
MMarcela replied to the thread Do you file depth gauges on safety chain?.Belt sander still heats the edge of the blade. I have a bench grinder and angle grinder so no advantage to the belt. I will never wear...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.I had asked Grin about a replacement 26" rim and they sent a good recommendation. I just sent them another asking about a 29 as I don't...
-
MMarcela reacted to PCeBiker's post in the thread Is it possble to covert 26x4 to 3 onch tire and rim combo with
Like.
Yeah, there's lots of motor kits, but the problem is that if it's got a Fat motor, then it's got a Fat rim as well. A fat rim has the... -
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.Useful spoke info https://ebikes.ca/resources/getting-advanced/wheel-build.html
-
MMarcela replied to the thread Do you file depth gauges on safety chain?.I use an Oregon bench grinder. Have to make sure it is centered when cutting the knives or they cut crooked. Cut the gauges however...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.Thing would be to find someone who already has the package together. This is close but not quite there. Mine uses the Hentach motors...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.I am 180#. The 26 x 4 tires on there are rated for 198#. I scaled it and most of my weight goes on the rear tire. Probably depends...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.When I was checking diameters, didn't seem like the 27.5 was much more than the 26, if I was going to do it, to make it worth my while...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.That one looks good. The 30mm inner rim width is right for the 26 dia rim I was looking for, would have to check to see if there was a...
-
MMarcela reacted to PCeBiker's post in the thread Is it possble to covert 26x4 to 3 onch tire and rim combo with Like.
I fell into a rabbit hole on Aliexpress and spent half a day searching for rims. My rims aren't labeled so I had to do manual...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.Where did you shop your rims?
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.Thanks for your input. Both the Wired, and all their bikes at the moment as far as I know, are hub drive. Both rears are same, one has...
-
MMarcela replied to the thread Is it possble to covert 26x4 to 3 onch tire and rim combo.3 yrs later how did the modification turn out, or anyone else care to chime in with new information? I have a couple Wired ebikes...