Ken Shopken's latest activity
-
For fine wire soldering, especially on e-bike wiring harnesses, I find this tool to be quite handy... -
One electricians trick is to tie a string to a small corner piece of a plastic bag. A vacuum will suck it from point A to B in 1 second.
-
Park Tool, I am a fan, wants $80 to do this same thing.
-
I've been watching Park Tools new PRS-30LB mechanical lift work stand since it was first introduced back in February. It wasn't widely...
-
I can't say I use it much, I just wanted something compact to keep in the car for emergencies. I have a few other tools in the bag with...
-
got the Wera socket set for Christmas. not too much for bikes, more for the house. But it's a great setup. The socket head swivels and...
-
I thought something was off. It is well over 1%. When it is this bad it means a new chain, new gear cluster, and a new chainring. What...
-
What bike manufacturers make brake adjusters inaccessible? I've had 3 hub-drive bikes with Tektro mechanical brakes. I usually took the...
-
Bend ball end allen key also does the job in my experience
-
That was a $600 bike. It had many problems including a front wheel that would not rotate. It only hit half the gears. The levers went...
-
Ken Shopken reacted to RunForTheHills's post in the thread Bafang 72v 3000w Rear-hub motor with
Like.
If you look at the specs, it's has a torque sensor: Sensors Double Sided Torque Sensor Integrated in Motor -
Ken Shopken replied to the thread Show Us a Tool.I have a set of these- They are fantastic and will allow working on hydraulic lines without damage and allow removal of damaged lines...
-
Or you could get a Knipex Plier Wrench:
-
I just wanted the leverage. I mostly deal with cassettes and not freewheels and I don't care if I slightly mar the seldom used socket...
-
Ken Shopken replied to the thread Show Us a Tool.Here is an example of forcing the blind bearing puller without lightly grinding the sides to fit the taper of the bearing being pulled...
-
