John Fuller's latest activity
-
John Fuller replied to the thread Motor clicking.I recently changed front and rear sprockets and new Gates belt. Work was done by a highly qualified local bike shop mechanic, all parts... -
John Fuller reacted to DaveMatthews's post in the thread Riese & Müller stops sales to the USA with
Like.
What a sad state of affairs... -
John Fuller replied to the thread Belt Tension.Claude tells me there is no belt tension adjustment on the Homage. There's certainly no way to position the rear wheel further back in...
-
John Fuller replied to the thread Belt Tension.I just changed the front and rear sprockets on my 2022 Homage w/E14 Rohloff but can't find any instructions for how to adjust the belt...
-
There are videos on changing Gates belts, just not specific to R&M. Maybe look at those and see if you can go from there?
-
A belt change shouldn't be all that difficult. Though adjusting the tension by smartphone was new to me.
-
If I am correct, it's this bike isn't it? than the chain-tension (belt tension) is basicly solved with the chaintensioner near the...
-
The belt on my 2022 Homage E14 was jammed by a stick this week and it broke. I’m now faced with the following dilemma. There isn’t an...
-
John Fuller replied to the thread How to identify whether my Homage is a 4.The manufacturer of the adapter said it wouldn't fit the Homage 4 because there were cables routed through the head tube area that woul...
-
John Fuller replied to the thread How to identify whether my Homage is a 4.Well, that describes my Homage to a T: fully integrated Bosch PowerTube battery and the distinctive one-piece frame/step-through design...
-
-
I'm very happy too. And I do stop peddling most of the time. I've started trying to make the tiny pause needed in the stroke into a...
-
I always stop pedalling momentarily when I change. The change is easily fast enough and the action becomes habitual quickly. Very happy...
-
I'm shopping for a handlebar adapter for my 2022 Homage. On the vendor's web site it says the adapter will not work with a Homage 4...
