Gionnirocket's latest activity
-
Nice bike and welcome to the forum! All good advice above. A lot will depend on where you store the batteries. Temps between 60F and... -
-
Probably the best approach. If you haven't worked on a cassette before, there are special tools available to make the process easier...
-
Gionnirocket replied to the thread Lady cyclist killed in Davis involving juvenile on ebike...on the bike path..That's all I have to say about that.
-
The battery will self discharge. Six months is borderline. I have a battery from EM3EV with a smart BMS that has very little discharge...
-
Gionnirocket replied to the thread Battery Storage.You should be fine at 6 months if your battery is in good condition. I've stored batteries near 1 year with only a 0.2V drop in that...
-
Gionnirocket replied to the thread Suspension Frame: bearing tool (6902 bearing).Ok i think I'm all set. I picked up a cheepó set from Amazon. $36 delivered...
-
-
Gionnirocket reacted to 6zfshdb's post in the thread Suspension Frame: bearing tool (6902 bearing) with
Like.
My first thought is to take a caliper gauge to Harbor Freight and check the OD of their sockets. A 3/8" drive socket should be large... -
Gionnirocket replied to the thread Builder gone to the dark side..Ignorance. Learn how to program. You go Don Bafango!
-
My new ride, Bafang BBSHD, then a Bafang, Bafang G62 Fatbike 190mm Bafang G62 Standard Wind (8.0 RPM/V) Rear Hub Motor for 190-195mm...
-
Gionnirocket replied to the thread Suspension Frame: bearing tool (6902 bearing).I guess I'd have to buy it to find out. But now that I think about it... it would need to be just shy of 28mm or it'll get stuck in the...
-
Gionnirocket reacted to RunForTheHills's post in the thread Suspension Frame: bearing tool (6902 bearing) with Like.
Maybe this...
-
Gionnirocket replied to the thread Suspension Frame: bearing tool (6902 bearing).Thanks. Actually the replacements I ended up ordering are 2RS. Couldn't find VRD I don't think I can use the old bearing to push the new...
-
Gionnirocket reacted to Base's post in the thread Suspension Frame: bearing tool (6902 bearing) with Like.
Btw, the VRD is the type of seals in the bearing. In this case a thick rubber seal on both sides. Usually in bike-bearings you'd find...
-
Gionnirocket replied to the thread Suspension Frame: bearing tool (6902 bearing).Yeah gave that a quick try with the sockets on hand and though very close, not close enough for this tight press
