Gionnirocket's latest activity
-
Gionnirocket replied to the thread 2022 Levo 2.2 motor replacement.Well this and other threads are an indication...and now you have your own experience. But hey.. they may give you a discount on a... -
I used a tubing pipe cutter to shorten a bar by 30mm per end. It is much better than a hacksaw: Less pain, straight, fast. The ends...
-
Gionnirocket replied to the thread Show Us a Tool.I don't think I've ever done it any other way... even though I've installed miles of steel and aluminum pipe and have a Milwaukee...
-
-
Gionnirocket replied to the thread Please Help Me Find An e-Bike With The Following Requirements.Unfamiliar with the brand but it seems they have a few similar bikes with a mix of entry and mid level hardware and variations of the...
-
Gionnirocket reacted to Base's post in the thread Please Help Me Find An e-Bike With The Following Requirements with
Like.
https://www.winora.com/nl-en/p/yucatan-r8f-wyan1/... -
Gionnirocket reacted to stompandgo's post in the thread Please Help Me Find An e-Bike With The Following Requirements with Like.
No, I would not significantly change any part of the original design of any bike. Major changes can cause problems. Frames should not...
-
Gionnirocket replied to the thread Please Help Me Find An e-Bike With The Following Requirements.Friends don't let friends buy bikes with poorly desiged/manufactured frames and unreliable motors. Even if they did get a ton of money...
-
Gionnirocket reacted to Stefan Mikes's post in the thread Please Help Me Find An e-Bike With The Following Requirements with Haha.
I beg to differ. The 2017 model frame was used on all Vado from the beginning to (and including) MY 2020. Only MY 2017 e-bikes had their...
-
Gionnirocket reacted to bbrebis's post in the thread Please Help Me Find An e-Bike With The Following Requirements with Like.
You're right, the Yucatan r8f is quite close to what I'm looking for. Thank you!
-
Gionnirocket reacted to stompandgo's post in the thread Please Help Me Find An e-Bike With The Following Requirements with Like.
A suspension fork shouldn't be needed to keep a frame from cracking. It's a design issue.
-
It is that darn internal lip. Don't give me no lip! There is a regular exit hole at the bottom of the down tube at the BB but I filled...
-
I am trying to get it from the motor up the down tube to by the head/steer tube and out the port there. But there is an internal lip and...
-
The problem is when you have to "push" the cable through. I've used coat hangers for feeding things though other things, cuz you can...
-
Just be sure no one’s finger is in the string on the other end.
-
That idea sounds like it Really Sucks, so I have to try it. 😅
