Gionnirocket's latest activity
-
Imaging the front of this type of curve to be the charge cycle. Like pumping a 120 psi road bike tire, the front part of the curve... -
Gionnirocket replied to the thread Toseven DM02 500W Motor.It becomes complicated because all batteries aren't created equal. A 3cell/parallel will act different than a 5cell/parallel. A 18650...
-
I could only show so much of that chart. Above are recommended high and low settings. When you go to the high setting and press Up and...
-
Gionnirocket replied to the thread Toseven DM02 500W Motor.In one way that makes sense as the upper voltages are more efficient and drop slower. That said I've never used % and once you know your...
-
Gionnirocket replied to the thread Rockshox Monarch RL... Doesn't fully extend?.Why can't you use the old bolts? And looking at the sleeve hardware you ordered the OD is 12.7mm. If your DNM arrives like mine the...
-
On my most recent DM02 build the battery would show three bars and the display would show half-a-bar. I used this chart to help sync...
-
Gionnirocket replied to the thread Toseven DM02 500W Motor.I wouldn't worry about the battery LED syncing with the display. Personally.. I would set my desired LV cut off in the controller (39v...
-
Gionnirocket replied to the thread Rockshox Monarch RL... Doesn't fully extend?.And if you are staying with 10mm...why do you need new bolts anyway? Just took a look at mine and there's a 8mm shoulder in the frame...
-
Gionnirocket replied to the thread 2025 - Our Rides in Words, Photos, Maps and Videos.And that's why I do my own work... Add there's much less downtime and no humping the bike around town. The kid a the LBS is thinking...
-
Gionnirocket replied to the thread Rockshox Monarch RL... Doesn't fully extend?.Not sure what you got there... but doesn't the bolt need to be this flavor?
-
-
Gionnirocket replied to the thread Rockshox Monarch RL... Doesn't fully extend?.I mentioned that in #107 as my Rockshox is 12.7mm I think the solution is a new 8mm bolt
-
Gionnirocket replied to the thread Rockshox Monarch RL... Doesn't fully extend?.If 10mm ID isn't available... Then maybe the answer is new 8mm bolts. If you do find a 10mm one but it's too long, you can cut it...
-
Gionnirocket replied to the thread Rockshox Monarch RL... Doesn't fully extend?.If I'm looking at it correctly it looks like you have a 10mm bolt Then there's the sleeve that has the plastic spacers over it Like this...
-
-
Gionnirocket replied to the thread Rockshox Monarch RL... Doesn't fully extend?.Rockshox OD of bushing sleeve is 12.7mm DNM OD of bushing sleeve is 12mm Both use 8mm bolt Then match overall legnth... For you... 22...
-
-
Gionnirocket replied to the thread Bike Won't Turn On/Error Code 12.What did you do... Run it thru the car wash?!? 🙃 Is this it? Seems pricey for what it is... and if that's what you paid. Have you...
