Gionnirocket's latest activity
-
Gionnirocket replied to the thread Headlight.I don't ride much at all at night... but I ended tapping the battery and still using a stock lower wattage head/tail light set. My... -
I ran into this issue when I looked at replacing my OEM bike light. In my case, I was limited by the current the fine gauge bike wiring...
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.Yeah I did a little reading and it's the ability to get a more exact chain legnth that is the 1/2 links designed benefit. Though...
-
Gionnirocket replied to the thread Headlight.6v/500ma...so you'll be limited to the total watt output. If you need more light you can tap the battery and add a switch or use the...
-
The pitch or length between pins is identical, but single speed chains are wider, so force is dispersed over a larger area. Kids are...
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.Not cable tension... Derailleur adjustment. And what do you mean by slipping? Not staying in that gear? Chain riding over the teeth?
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.If you haven't tried a derailleur re_adjustment, that's where you should start. Then as @PedalUma says perhaps your hanger is out. But...
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.They have 2 odd teeth 🤣
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.Well I guess now we'll never know if you magic wax wet lube encapsulation process is for real or a fugazi. I'm still not at .75 with...
-
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.Probably could be done for a one to one sproket set up... But those with derailleurs?? But then one to one setups last longer in...
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.I wouldn't run three chains to one cassette... The derailleur will have one hell of a time synchronizing gear shifts 🤣
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.Heh!!! I know a guy who bio_waxes his ass and it will never get dirty or need shaving and will make the new boxers last. 🤣
-
Gionnirocket replied to the thread Lugging a Motor, Why it's Bad.Any wear on the chain is wearing the sprockets more... but 0.5 it's probably negligible and as you state the recommended wear is 0.75 so...
-
Yeah, I made a mess of my ceiling. 😀
-
I had forgotten exactly how I connected the U bolt so I went to look and take a picture. I don't know what happened? It's not like ther...
