EMGX's latest activity
-
EEMGX reacted to Rás Cnoic's post in the thread From Concept to Prototype: Ultra-Light Ebike Kit for Road Bikes Now in Development! with
Like.
Thought there was something fishy in your previous messages. Something about the tone was a head scratcher. I even began to suspect this... -
EEMGX reacted to Charlie Pendejo's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Getting close. 3D printed adapter seems fine, and simply bolting it to a stretchy velcro-based strap seemed like it'd be plenty secure...
-
EEMGX replied to the thread Schwalbe Tyre Problem.When I submitted a warranty claim they sent a automatic confirmation email and contacted me back and resolved the claim shortly. Maybe...
-
EEMGX replied to the thread Schwalbe Tyre Problem.My first thought is that it is a stone bruise causing damage to the internal plies and bulging of the overlying rubber compound...
-
EEMGX replied to the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY.Still trying alternatives to the stock control switch. This time using latching pushbutton switches instead of temporary blade. The...
-
-
EEMGX replied to the thread Still searching for the perfect ultra-light ebike kit for road bikes — here’s the idea in my head.Just for the sake of discussion, not really for the OP for whom this all seems to be a thought exercise - besides the Keyde torque...
-
EEMGX replied to the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY.I didn't so much like the qiroll hanging down from the kickstand bracket so I attached it from the topside. Less prone to damage and...
-
-
EEMGX reacted to dangerzone's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Thanks for the info. It's certainly neater than the zip tie, bent coat hanger and springs from an IKEA desk lamp contraption that I had...
-
EEMGX reacted to Charlie Pendejo's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Ha, I understand your lesson only too well. Just had an email exchange with the 3d printer (which I farmed out via a site called...
-
EEMGX replied to the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY.Interesting, post up when you get your custom printed adapter - I hope it works out like you want. I had my reasons for the non Qiroll...
-
EEMGX reacted to Charlie Pendejo's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
Yeah, I abandoned the idea to drill my hinge to mount directly to the motor, and then also had to return some brackets I thought might...
-
EEMGX replied to the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY.The spring hinge is 3" stainless steel that I got off Amazon. I needed cobalt drill bits to make the Qiroll attachment holes and one...
-
EEMGX reacted to dangerzone's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
The quick release would help in the sense that the motor can be removed without tools, but that's not something I can see myself...
-
EEMGX reacted to dangerzone's post in the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY with Like.
To answer my own question about Brompton compatibility. It does fit in the rear but involves removal (or trimming) of the mud guards...
-
EEMGX replied to the thread REVIEW: QR-E 250W ELECTRIC BOOSTER BICYCLE MOTOR AND B60i AND B70 BATTERY.Would the Qiroll quick release help with your folding/seat post interference issue? It's not expensive, $24 USD. At one point I...
-
