Chazmo's latest activity
-
Chazmo replied to the thread Frequent access problems: “Oops! We ran into some problems".I would bet that the AIs that people are running ubiquitously now are hitting EBR all the time. But, I really don’t know if that’s... -
Chazmo replied to the thread Tubeless Blues.Yeah, but Charge, you refuse to change ‘em! :D :D
-
Chazmo reacted to Gionnirocket's post in the thread Rotors for 2-piston Shimano BR-MT410 extremely limited? with
Like.
One thought. . . If you look at the outer most edge of the rotor you see it dips in reducing the contact area just about at the widest... -
Chazmo reacted to Ringo9's post in the thread Rotors for 2-piston Shimano BR-MT410 extremely limited? with Like.
Well I described (and showed) exactly that, that the contact area is 3.7mm less than the pad's area at the lowest point, but it then...
-
Chazmo posted the thread Frequent access problems: “Oops! We ran into some problems" in Get Help Using The Forums.Hi folks, I see the following frequently. On another forum, it was noted that A.I. bots (or should I just say A.I.s) were putting a...
-
-
Chazmo replied to the thread Tubeless Blues.rim tape? I dunno, Jeremy. Am I wrong about the cutouts? Look closely at the bigger picture. Are those not trapezoids? Is this not...
-
Chazmo replied to the thread Tubeless Blues.Mr. C., I don’t think that’s a solid rim. It looks to me like it’s got trapezoidal cutouts all the way around, as I’ve seen on lots of...
-
Chazmo replied to the thread Rotors for 2-piston Shimano BR-MT410 extremely limited?.@Ringo9 the shape of that Magura rotor is very interesting. Your measurement isn’t accurate because it’s only 12.8mm at its thinnest...
-
Chazmo reacted to BillH's post in the thread 2025 - Our Rides in Words, Photos, Maps and Videos with Love.
Been awhile posting for me. My rides each week take me down pretty much the same path over and over again mostly due to urban area I...
-
Chazmo reacted to stompandgo's post in the thread Rotors for 2-piston Shimano BR-MT410 extremely limited? with Like.
I use the following for unspecified hex socket head screws/bolts/axles: 2-3mm: 3Nm 4mm: 4-5Nm 5mm: 6-8Nm 6mm: 8-11Nm I use the low...
-
Chazmo reacted to Base's post in the thread Rotors for 2-piston Shimano BR-MT410 extremely limited? with Love.
Both IS2000 and Postmount have a industry standard Torque spec. 6.8-7.2Nm Bolts for the IS rotor would go at 6.2Nm or based on the...
-
those are great dunno if the link would work for the US https://www.amazon.nl/-/en/BIKETEK-Motorcycle-garage-orange-without/dp/B0141G5FM6
-
Chazmo replied to the thread 2025 - Our Rides in Words, Photos, Maps and Videos.And surely not a show you’d want to be too close to, Jeremy!
-
Chazmo replied to the thread 2025 - Our Rides in Words, Photos, Maps and Videos.It’s good to be seen! Or, in your case, mule, unseen??? :D
-
Chazmo replied to the thread Show Us a Tool.That’s briliant. I’ve already lost parts in the grass and dirt where I work on ebike outside. I need a mat like that.
