6zfshdb's latest activity
-
6zfshdb reacted to Gionnirocket's post in the thread Source for Magura Motor Cutout Switch with
Like.
Those aren't the peal and stick type... That's the easily sourced Tektro style I had mentioned. Actually riding without the brake cut... -
I would use external ones. You peal and stick the pickup and the lever gets a magnet glued on.
-
My experience with derailleurs and now the tensioner used with my IGH is that if the chain isn't relatively clean and lubricated every...
-
6zfshdb replied to the thread Road Dust Problem.I think the answer depends on what type of bike you ride. Derailleur cogs, cassette gears, chain rings and motor sprockets do wear, but...
-
My experience with dry lubes is that they don't last very long at all. If you read the description there's no mention for use in the...
-
6zfshdb replied to the thread Road Dust Problem.Keep in mind a chain is a wear item and will need to be replaced eventually. Sure, cleaning and lubing on a regular basis will...
-
6zfshdb replied to the thread Road Dust Problem.The WD 40 dry lube would probably work to keep dust from accumulating on most bike surfaces but IMO, it won't provide enough lubrication...
-
6zfshdb replied to the thread Source for Magura Motor Cutout Switch.Yes, the warranty expired last year. It's likely my fault anyway. The crack probably happened when I dropped the bike 2 seasons ago...
-
6zfshdb reacted to Gionnirocket's post in the thread Source for Magura Motor Cutout Switch with Like.
So much for the touted lighter composite material... and like that amount of aluminum really needs to be eliminated. Supposedly it has a...
-
It's a bike chain... I'm not going to gold plate it and then protect it with a coat of titanium 🙃 As for the paraffin wax treatment...
-
6zfshdb reacted to Gionnirocket's post in the thread Source for Magura Motor Cutout Switch with Like.
Curiosity got me and after doing a little reading consensus is that my suggestion isn't as plausible as I thought....basically for the...
-
6zfshdb replied to the thread Source for Magura Motor Cutout Switch.The switch wasn't the only problem. It turned out to be a much more expensive repair. After I disassembled the brake handle, I found the...
-
-
6zfshdb reacted to Jeremy McCreary's post in the thread Show us pictures of where you ride your ebikes! with Like.
You're not the only one. Most of the cobble beaches here are protected from rock rustling, but there's a steady migration of these...
-
What some are doing and I plan to try at the next chain change is pure paraffin and some dry Teflon powder. Ratio 50:1 respectively...
-
6zfshdb replied to the thread Show us pictures of where you ride your ebikes!.I actually saw a bike with a sail on a trail a few years back. Looked similar to this one:
-
