6zfshdb's latest activity

  • 6zfshdb
    6zfshdb replied to the thread Solder to terminal block.
    The one I saw had a row of brass pins with rounded heads that fit the semi circular cutouts of the blades. The pins were coated with...
  • 6zfshdb
    6zfshdb reacted to Gionnirocket's post in the thread Solder to terminal block with Like Like.
    I thought there might be some mechanical method when I saw the half circle in the center of each terminal... But I've never seen one...
  • 6zfshdb
    6zfshdb reacted to Gionnirocket's post in the thread Show Us a Tool with Like Like.
    So far I've never had a need to discharge any batteries. Using my DIY charge adapter I've never accidentally charged more than I wanted...
  • 6zfshdb
    6zfshdb reacted to PCeBiker's post in the thread Show Us a Tool with Like Like.
    I remember you posting those bulbs 💡 before. I'm pretty sure they're LED bulbs at ~10 Watts, but I think they run on 48 volts? I found...
  • 6zfshdb
    6zfshdb replied to the thread Solder to terminal block.
    You don't. The mounts I've seen that use these connector plates are screwed in place to make the connection to lugs inside the mount...
  • 6zfshdb
    6zfshdb replied to the thread Show Us a Tool.
    I also use incandescent bulbs for a discharge rig: I screw in as many bulbs as needed. As an added bonus, I have used the rig to...
    • 1748264299262.jpeg
    • 1748264848334.png
  • 6zfshdb
    6zfshdb reacted to PCeBiker's post in the thread Show Us a Tool with Like Like.
    I ended up using four bulbs to drain my battery, but it still took a long time. I got my cat to keep an eye on it. 😄 The bulbs were...
  • 6zfshdb
    6zfshdb reacted to MrCaspan's post in the thread Solder to terminal block with Like Like.
    yeah there's no way I can put more than four or five wires through that hole the width of the wires the whole width of the connector.. I...
  • 6zfshdb
    6zfshdb replied to the thread Solder to terminal block.
    IMO, this is the best approach and the way I do mine. It's also the way the maker of my bikes does it. Applying heat from a soldering...
  • 6zfshdb
    6zfshdb reacted to MrCaspan's post in the thread Solder to terminal block with Like Like.
    Actually after measuring these terminal spade width they are about 2.9mm wide so I can use a 2.8mm female spade connector for 14 gauge...
  • 6zfshdb
    6zfshdb reacted to DaveMatthews's post in the thread Show us pictures of where you ride your ebikes! with Like Like.
    Today I was feeling a bit bushed, but to heck with that. Weather was dayum fine pushing 20C so set off in long pants and t-shirt with...
  • 6zfshdb
    6zfshdb reacted to Gionnirocket's post in the thread Show Us a Tool with Like Like.
    If you want I can let you borrow this! For comparison, that's a typical 75watt A lamp next to it. This one time at band camp... I...
  • 6zfshdb
    6zfshdb reacted to Finger Lakes E-Bikers's post in the thread Sena Bikom 20 Intercom with Like Like.
    Another update. Hubby and I just completed a 370 mile ride. I loved our Sena Bikom. It was so nice to communicate without shouting...
  • 6zfshdb
    6zfshdb reacted to Stefan Mikes's post in the thread Show Us a Tool with Like Like.
    Which is all written on the tool :) 0.5% is for 11-12 speed. Eight serviceable cogs on CS-M8100-12... Five serviceable cogs on...
Show older items
Back